Plastic drum shredder machine for HDPE drum recycling, industrial plastic barrel shredding equipment

Selection Guide for Hydraulic Feeding Press Devices for Double-Shaft Shredders

 

The hydraulic feeding press device is a critical accessory for double-shaft shredders, designed to forcibly press and feed lightweight, fluffy, elastic, hollow bulky, or baled plastic materials. It effectively solves common feeding problems such as floating materials, slipping, bridging, shaft wrapping, intermittent feeding, and low production capacity, significantly improving shredding efficiency and operational stability. Notably, dense, rigid, heavy plastics that can be easily gripped by cutters by their own weight do not require this device, making targeted selection essential for cost-effectiveness and performance.

 

 

 1. Plastic Materials That Mandate a Hydraulic Feeding Press

For lightweight, low-density, or elastic plastic materials that cannot be reliably fed by gravity alone, a hydraulic feeding press is indispensable to ensure continuous, stable shredding. Below are the key material categories and their specific application scenarios:

   

1.1  Flexible Thin Film Plastics (LDPE/LLDPE/PE Agricultural Film, Packaging Film, Stretch Wrap)

Core Features: Ultra-lightweight, highly stretchable, prone to floating above the cutter shafts and slipping. These films easily wrap around cutter shafts and cause material bridging in the hopper, disrupting normal operation.

 

Application Scenarios: Whole rolls of greenhouse film, baled agricultural film, express stretch wrap, bundled plastic packaging bags, and recycled flexible film waste.

 

Reason for Installation: The hydraulic platen continuously presses the film into the cutter teeth, eliminating floating and shaft wrapping issues. This enables stable continuous feeding, drastically boosting throughput and reducing downtime caused by material jams or interruptions.

 

1.2  PP Woven Bags, Bulk Bags, and Baled Plastic Bundles

Core Features: Fluffy structure with large internal voids and low self-weight. Uncut bales cannot be actively pulled by the cutter shafts, leading to suspended materials and machine idling.

 

Application Scenarios: Recycled plastic bulk bags, fertilizer woven bags, compressed plastic bales, and bundled industrial plastic packaging waste.

 

Reason for Installation: The hydraulic cylinder pushes entire bales tightly against the cutter shafts, preventing suspended materials, idling, and frequent overload reversal. This ensures consistent feeding and protects the shredder motor from damage caused by uneven load.

 

1.3 Large Hollow Thick-Walled Plastic Products (IBC Tanks, 200L HDPE Chemical Drums, Large Plastic Water Tanks, Plastic Boat Hulls)

Core Features: Hollow interior with large volume and strong buoyancy. These products bounce and float in the hopper, cannot be fully gripped by cutters in one pass, and result in repeated slipping and incomplete shredding.

 

Application Scenarios: HDPE chemical drums, plastic storage tanks, large vacuum-molded hollow parts, plastic boat shells, and large hollow plastic industrial components.

 

Reason for Installation: The hydraulic platen holds drums and hollow products in place to restrict bouncing, stabilizes continuous wall shearing, and reduces frequent machine overload reversal. This improves shredding uniformity and extends the service life of cutter blades.

 

1.4 . Bulk Foamed Plastics, EVA Foam, EPS Polystyrene Foam

Core Features: Extremely low density with strong rebound. These materials bounce upward during shredding and easily escape the cutter grip, leading to intermittent feeding and low efficiency.

 

Reason for Installation: Continuous hydraulic compression counteracts foam rebound, ensuring uninterrupted crushing and consistent feeding. This turns lightweight, hard-to-process foam waste into manageable shreds with minimal energy waste.

 

1.5 . Large Flexible Soft Plastics (Rubber-Modified Plastics, Soft PVC Rolls, Silicone Plastics, Bulk PU Foam)

Core Features: High elasticity and upward spring-back under shear force. When cut, these materials spring away from the cutters, cutting off feeding and causing operational interruptions.

 

Reason for Installation: Hydraulic pressure offsets elastic rebound, forcing the materials into the cutter teeth and guaranteeing consistent, uninterrupted feeding. This is critical for processing soft, elastic plastics that would otherwise stall the shredder.

 

1.6. Thin Plastic Sheets, Rolled Plastic Film, Plastic Composite Non-Wovens

Whole rolls of these materials have insufficient self-weight and tend to slip while rotating, leading to uneven feeding and deviation. The hydraulic platen clamps roll ends firmly, ensuring uniform, deviation-free feeding and improving shredding precision.

 

 

2.  Plastic Materials That Do Not Require a Hydraulic Feeding Press

Dense, rigid, heavy plastics with sufficient self-weight can be automatically pulled by the hooked cutters of counter-rotating twin shafts via gravity alone, with no floating, bridging, or slipping issues. Installing a press unit for these materials would only increase unnecessary costs and waste energy. Below are the key material categories:

 

2.1  Solid Rigid Plastic Blocks, Injection Sprues, Plastic Lumps (ABS/PS/PP/Solid HDPE Blocks)

Injection gates, waste plastic runners, large extruded solid blocks, and rigid plastic lumps sink naturally into the hopper. They are instantly gripped by cutter shafts, enabling smooth feeding with no slipping or interruptions.

 

2.2 . Rigid Plastic Pipes, Thick Plastic Profiles (PVC Water Supply Pipes, PPR Pipes, Thick Plastic Sheets, Rigid Automotive Plastic Bumpers)

These materials are hard, rigid, and heavy. They sink naturally once loaded, and the cutter hooks firmly grip pipe walls and sheet surfaces for automatic pulling. No floating, bouncing, or feeding interruptions occur during processing.

 

2.3. Rigid Brittle Plastics (PET Bottle Bricks, Plastic Pallets, Rigid Plastic Household Appliance Casings, PC Panels)

Mineral water PET bottles, plastic turnover baskets, ABS appliance shells, and PC sheets are hard, non-rebounding, and heavy enough to be hooked instantly by cutters. No floating or bridging occurs. Note: Loose individual PET bottles need no press; compressed baled PET bottle bricks remain fluffy and lightweight, requiring hydraulic pressing.

 

2.4 . Small Rigid Plastic Scraps, Injection Runners, Tiny Plastic Parts

Fine, dense waste fragments accumulate naturally toward the cutter shafts. With no floating or slipping issues, they feed smoothly into the cutters without the need for hydraulic assistance.

 

2.5 . High-Density Solid Plastic Rods, Plastic Plugs, Thick Plastic Flanges

Solid high-density workpieces carry enough self-weight for autonomous feeding. They sink into the hopper and are gripped by cutters immediately, with no floating, rebound, or feeding interruptions.

 

 

3 . Selection Summary

3.1 . Plastics That Need a Hydraulic Press Feeder

Plastic TypeKey FeaturesCommon ApplicationsReason for Installation
PE film, stretch wrap, greenhouse filmLight, stretchy, floats, wraps shaftsFilm rolls, baled filmPress down for stable feeding, avoid winding and floating
PP jumbo bags, woven bag balesFluffy, light, hard to pullFertilizer bags, packed plastic balesPush bales close to cutters, prevent idling and overload
IBC tanks, 200L plastic drums, plastic boatsHollow, buoyant, jumps during shreddingChemical barrels, large hollow plastic partsFix materials to reduce machine overload and bouncing
EPS / EVA foamUltra-light, strong reboundFoam packaging wasteSuppress rebound for continuous, uninterrupted shredding
Soft PVC rolls, PU foam, modified soft plasticElastic, springs up when cutSoft plastic rolls, silicone plasticOffset elastic rebound to guarantee consistent feeding
Rolled thin plastic sheets & composite non-wovenLight rolls, easy to slipPlastic film rolls, coated non-wovenHold rolls tight to avoid slipping and feeding deviation

 

 

3.2 . Plastics Without Hydraulic Press Feeder Required

Plastic TypeKey FeaturesCommon ApplicationsRemarks
Solid hard plastic blocks, injection runnersDense, heavy, sinks automaticallyABS/PP/HDPE solid lumps, sprucesGravity feeding, no floating problem
PVC/PPR pipes, thick plastic boards, car bumpersRigid, heavy, easy to grab by cuttersPlastic pipes, hard automotive plastic partsSelf-feed via twin shaft hooks, no assistance needed
Hard brittle plastic: PET bottles, plastic pallets, appliance shellsHard, no rebound, heavy enoughLoose PET bottles, plastic crates, PC shellsCompressed PET bales still need hydraulic press
Small rigid plastic scraps & small injection partsDense fragments, good flow-abilityPlastic trim, small defective plastic piecesNatural feeding without floating or slipping
Solid plastic rods, plugs, thick flangesHigh density solid work-piecesSolid plastic fittingsEnough self-weight for automatic feeding

 

 

Frequently Asked Questions (FAQ)

Q1: Will installing a hydraulic feeding press damage the double-shaft shredder?

No, when selected and installed correctly, the hydraulic feeding press works in sync with the shredder’s operation. It only applies targeted pressure to assist feeding, avoiding excessive force that could damage the machine. Our professional engineers can customize the pressure parameters based on your specific materials to ensure safe, efficient operation.

 

Q2: Can a hydraulic feeding press handle mixed plastic materials?

Yes, it works effectively for mixed materials containing lightweight, fluffy, or elastic plastics. For mixed materials with both rigid heavy plastics and lightweight ones, the press can be adjusted to apply pressure only when needed, optimizing feeding efficiency without unnecessary energy consumption.

 

Q3: How to maintain the hydraulic feeding press for long-term use?

Regular maintenance includes checking hydraulic oil levels and quality, inspecting seals for leaks, cleaning the platen and hopper to prevent material buildup, and tightening loose bolts. Following a routine maintenance schedule can extend the device’s service life and ensure consistent performance.

 

 

Get Professional Support for Your Shredder Configuration

Selecting the right hydraulic feeding press device is key to maximizing your double-shaft shredder’s performance and avoiding unnecessary costs. Every recycling operation has unique material characteristics, and a one-size-fits-all approach may not deliver optimal results.

If you have any questions about whether a hydraulic feeding press is suitable for your specific materials, or need help customizing the right configuration for your shredding system, feel free to contact our professional engineer team. We’re here to provide tailored guidance and reliable solutions to meet your production needs.

For more professional insights into industrial shredding equipment safety standards and specification guidelines, you can also refer to IECEE, an authoritative third-party body for international electrical and mechanical equipment safety standards.
Request a Quote
All products are guaranteed for 12 months!