Rayli PET plastic recycling washing line, cold wash and hot wash PET bottle recycling system in factory workshop

Cold wash vs hot wash PET line: Key process and operational differences

 

 

PET bottle recycling production lines are generally divided into cold washing lines and hot washing lines. The main differences between the two lie in washing temperature, the way cleaning agents are used, contaminant removal capability, and equipment operating costs. Choosing the right production line requires a comprehensive consideration of the contamination level of raw materials, the quality requirements for recycled PET flakes, and downstream market demand.

 

 

 

1. Process Differences Between PET Cold Washing Lines and Hot Washing Lines

 

A PET cold washing line mainly removes mud, sand, loose dirt, and some label residue from the surface of PET flakes through mechanical friction, water washing, and float-sink separation. A typical process flow is:

Raw PET Bottles → Pre-Sorting → Label Remover → Crusher → Float-Sink Separation → Friction Washing → Rinsing → Drying → Air Classifying → PET Flake Storage

 

The cold washing process usually does not require high-temperature alkaline cleaning, and the equipment configuration is relatively simple. It is suitable for recycling projects where the raw materials have a relatively low contamination level and the requirements for flake cleanliness are moderate. However, its cleaning effect is usually limited for stubborn adhesives, oil stains, and some organic residues. 

 

On the basis of conventional crushing, sorting, and washing processes, a PET hot washing line adds a high-temperature washing stage, usually using heated water, alkaline cleaning solution, and appropriate cleaning agents to help remove glue, grease, and harder-to-remove contaminants from the surface of PET flakes. After washing, thorough rinsing is also required to reduce residual cleaning agents.

 

A typical process flow is:

Raw PET Bottles → Pre-Sorting → Label Remover → Crusher → Float-Sink Separation → Hot Washing → Friction Washing → Rinsing → Drying → Air Classifying → PET Flake Storage

 

In actual production lines, the order of processes such as float-sink separation, hot washing, and rinsing can be adjusted according to the condition of the raw materials, and friction washing or fine sorting equipment can be added. The specific temperature, cleaning agent concentration, and treatment time in the hot washing stage should be determined based on the raw materials and the quality requirements of the target product. 

Rayli PET hot washing line, high temperature PET bottle recycling washing system for removing glue and oil contaminants

 

 

2. Cost Comparison Between PET Cold Washing Lines and Hot Washing Lines

 

The cost difference between cold washing lines and hot washing lines is mainly reflected in two aspects: initial equipment investment and long-term operating costs.

 

A cold washing line usually does not require a dedicated high-temperature washing tank, heating system, or associated cleaning-agent dosing equipment. Therefore, the initial investment is relatively low, and the energy consumption for heating during operation is also lower. For projects with relatively clean raw materials and moderate product quality requirements, a cold washing line can help control equipment investment and production costs.

 

A hot washing line requires additional heating devices, heat-resistant washing equipment, and a cleaning agent management system, so the equipment investment is usually higher. During production, costs such as water heating, cleaning agent consumption, and wastewater treatment must also be borne. However, when customers have higher requirements for flake cleanliness, the hot washing process can help expand the applicable range of raw materials and increase the added value of products.

 

There is no universal cost ratio applicable to all projects. Capacity, equipment configuration, energy prices, raw material contamination level, and wastewater treatment requirements all affect the final investment and operating costs.

 

 

 

3. Application Scenarios for PET Cold Washing Lines and Hot Washing Lines

 

What projects are cold washing lines suitable for?

 

Cold washing lines are suitable for recycling projects where the raw materials are relatively clean, contain fewer contaminants, and downstream customers have moderate quality requirements for PET flakes. For example, some recycled polyester fiber, strapping, and non-food-contact sheet production projects can choose the cold washing process according to their raw material specifications and finished product requirements.

 

For recycling companies with limited budgets that want to control initial investment, a cold washing line is also a solution worth considering. However, before purchasing, it is necessary to first confirm whether the adhesive residue, impurity content, and moisture content of the washed flakes meet the downstream customers’ acceptance standards.

 

What projects are hot washing lines suitable for?

 

Hot washing lines are more suitable for heavily contaminated waste PET bottles and for projects with stricter requirements for adhesive residue, oil stains, and flake purity. For companies that hope to produce high-quality recycled PET flakes, further process them into high-requirement sheets, or enter higher value-added markets, the hot washing process usually offers more advantages.

 

It should be noted that hot washing does not mean the final product automatically meets food-grade standards. When recycled PET is used for food-contact packaging, it must also comply with applicable regulations and adopt validated or recognized decontamination processes and associated quality control measures. An ordinary hot washing line alone cannot guarantee compliance with the requirements for food-grade recycled plastics.

 

 

 

4. How to Choose the Right PET Washing Production Line?

 

When choosing between a PET cold washing line and a hot washing line, the first step is to clarify the source of raw materials. If the recycled materials are well-sorted PET beverage bottles with little contamination, the cold washing option can be evaluated first. If the raw materials contain more glue, oil stains, and other hard-to-remove contaminants, the hot washing process should be given priority consideration.

 

Second, it is necessary to understand the quality requirements of downstream customers, including flake purity, adhesive residue, color, moisture content, and other impurity indicators. Only after these indicators are clarified can the crusher, friction washer, float-sink separation tank, hot washing tank, and rinsing equipment be reasonably configured, avoiding insufficient equipment investment or overconfiguration.

 

Finally, production scale, energy costs, water conditions, and wastewater treatment capacity should also be comprehensively evaluated. If there are plans to upgrade product quality or enter more demanding markets in the future, the expansion space of the production line should also be considered in advance to reduce later modification costs.

 

 

 

Conclusion

 

PET cold washing lines and hot washing lines each have their own advantages. Cold washing lines have relatively simple equipment configurations and lower investment and operating costs, making them suitable for projects with relatively clean raw materials and moderate product quality requirements. Hot washing lines have stronger contaminant removal capability and are more suitable for recycling projects with higher requirements for cleanliness and flake quality.

 

For plastic recycling companies, the most suitable production line is not necessarily the one with the lowest cost or the highest degree of cleaning, but rather a solution that can stably meet the requirements of the target product while balancing investment and long-term operating costs.

 

If you are working on a new PET flake recycling project or planning to upgrade your existing washing line, our team can assess your raw material condition, target flake specs and budget to recommend a suitable setup. Visit our official website https://raylimachinery.com/ to explore our PET cold washing lines, hot washing lines and custom plastic recycling solutions, and feel free to reach out if you have any questions.

Request a Quote
All products are guaranteed for 12 months!